CSCS Mock Test Full 50 Questions 2024

This CSCS mock test is a full 50-question example designed to help you practice and prepare for your real Health, Safety and Environment Test in 2024. All the questions will be pulled at random from some of the core health and safety topics covered in the real CSCS test.

For the real test, you will have 45 minutes to complete 50 multiple-choice questions, you’ll need to demonstrate that you have a good theoretical knowledge of many health and safety topics before you can pass your test and apply for your CSCS card.

Most of the questions in the real test will require a single answer but there are a few which require multiple answers. In keeping with this format, we’ve added questions that require multiple answers so you can get the full experience when attempting any of our CSCS mock tests.

If a question requires two answers, you’ll need to choose both correct answers before you can get a full point for that question, so please ensure that you read each question carefully. The pass mark for this CSCS mock test is 45 out of 50. Good luck!

1. Should hand tools such as saws, hammers and wire cutters be inspected?

Question 1 of 50

2. What’s the first thing you should do if a colleague collapse and there are no first-aiders around?

Question 2 of 50

3. What is the main cause of death among workers in confined spaces?

Question 3 of 50

4. Protective mid-soles in your safety footwear are designed to:

Question 4 of 50

5. Guard rails placed around the top of an excavation are meant to ___.

Question 5 of 50

6. What does the health and safety sign below mean?

Health and Safety Sign

Question 6 of 50

7. Hazardous substances can be identified by ____.

Question 7 of 50

8. What should you do if you’re working in a deep trench and notice a lorry with its engine running above you?

Question 8 of 50

9. Wet chemical fire extinguishers are identified by which colour?

Question 9 of 50

10. You’re working with a new chemical/substance and you start to feel ill, what should you do?

Question 10 of 50

11. Using eye protection is vital for onsite safety, when should you wear eye protection?

Question 11 of 50

12. What should you do if you’re unsure about a particular topic discussed during a site induction?

Question 12 of 50

13. Which of these must you do if you’re required to use an extension cable? (Choose 2 answers)

Question 13 of 50

14. All unsafe working practices should be reported immediately; whose responsibility is it to report unsafe working practices?

Question 14 of 50

15. Which of the following is the best option if you're trying to avoid causing any harm to a protected species in an area where you're working?

Question 15 of 50

16. You have to work with hazardous substances, what should your employer check regularly?

Question 16 of 50

17. Which TWO tasks below would you class as manual handling? (Choose 2 answers)

Question 17 of 50

18. What does the health and safety sign below mean?

Health-and-Safety-Sign-9

Question 18 of 50

19. What does this signal mean?

Question 19 of 50

20. What’s the first thing you should do if a worker collapses while working in a deep inspection chamber?

Question 20 of 50

21. High levels of dust can be inhaled when performing tasks such as grinding, drilling, sanding and cutting. These levels are most dangerous when:

Question 21 of 50

22. Wearing a safety helmet in hot weather can be uncomfortable, which of these is true about wearing a safety helmet in hot weather?

Question 22 of 50

23. What should you do if you have to work in a confined space and realize your permit to work will expire before you can finish the work?

Question 23 of 50

24. Over time, excess noise can damage your ability to hear. Can such a condition be reversed?

Question 24 of 50

25. If you’re working in a confined space and the gas alarm goes off you should:

Question 25 of 50

26. Which of these TWO types of fire extinguishers are most suitable for use on electrical fires? (Choose 2 answers)

Question 26 of 50

27. Which statement regarding asbestos is true?

Question 27 of 50

28. Safe manual handling techniques are essential in the workplace because___.

Question 28 of 50

29. You have to work in an excavation, what is the main hazard while working?

Question 29 of 50

30. In which of these are you most likely to encounter asbestos?

Question 30 of 50

31. What do yellow and black health and safety signs like the one below mean?

Health-and-Safety-Sign-11

Question 31 of 50

32. You should always wear appropriate boots when working in wet cement because____.

Question 32 of 50

33. A risk assessment is important because ____.

Question 33 of 50

34. Hand-arm vibration syndrome or vibration white finger can be described as:

Question 34 of 50

35. What could happen if oxygen levels in a confined space drops below 8 percent?

Question 35 of 50

36. You stumble upon a rare plant or animal that is protected by law, which TWO activities below would be considered illegal? (Choose 2 answers)

Question 36 of 50

37. Which of these statements is true about using ladders?

Question 37 of 50

38. Which hazardous substance is often found in cement-based roofing sheets?

Question 38 of 50

39. Why is it important for workers using a half mask respirator to be clean shaven?

Question 39 of 50

40. What should you do if one of your colleague has a nail stuck in their foot and you are not a trained first aider?

Question 40 of 50

41. Information regarding hazardous substances can be found in ___.

Question 41 of 50

42. What should you do if you notice the side supports moving around as you're working inside an excavation?

Question 42 of 50

43. You should tell your employer if you have contracted Weil’s disease on site because:

Question 43 of 50

44. An excavation should be battered back or stepped if ___.

Question 44 of 50

45. Why is a person always positioned immediately outside of a confined space while work is taking place inside it?

Question 45 of 50

46. What should you do if you need to use a mobile tower scaffold but the wheel brakes aren’t working?

Question 46 of 50

47. If you need to operate a power tool you must be:

Question 47 of 50

48. What is the safest way of entering and exiting a deep excavation?

Question 48 of 50

49. What should you do if you accidentally drop your safety helmet and crack it?

Question 49 of 50

50. What does the health and safety sign below mean?

Red-and-white-health-and-safety-sign

Question 50 of 50


 

Like this?

Click on a star to rate it!

Average rating 4.7 / 5. Vote count: 3186

No votes so far! Be the first to rate this post.

CSCS Mock Test | CSCS Revision | CSCS Test Questions