CSCS Mock Test Full 50 Questions 2024

This CSCS mock test is a full 50-question example designed to help you practice and prepare for your real Health, Safety and Environment Test in 2024. All the questions will be pulled at random from some of the core health and safety topics covered in the real CSCS test.

For the real test, you will have 45 minutes to complete 50 multiple-choice questions, you’ll need to demonstrate that you have a good theoretical knowledge of many health and safety topics before you can pass your test and apply for your CSCS card.

Most of the questions in the real test will require a single answer but there are a few which require multiple answers. In keeping with this format, we’ve added questions that require multiple answers so you can get the full experience when attempting any of our CSCS mock tests.

If a question requires two answers, you’ll need to choose both correct answers before you can get a full point for that question, so please ensure that you read each question carefully. The pass mark for this CSCS mock test is 45 out of 50. Good luck!

1. You have just finished working with a particularly noisy piece of equipment and you have a ringing in your ears. What does this symptom imply?

Question 1 of 50

2. An excavation should be battered back or stepped if ___.

Question 2 of 50

3. You should tell your employer if you have contracted Weil’s disease on site because:

Question 3 of 50

4. What does the health and safety sign below mean?

safety-sign-40

Question 4 of 50

5. Over time, excess noise can damage your hearing. Which of these is an early sign of this?

Question 5 of 50

6. You should report all serious accidents to_______.

Question 6 of 50

7. To ensure maximum protection when using a mask you should ____.

Question 7 of 50

8. In which of these are you most likely to encounter asbestos?

Question 8 of 50

9. To help prevent injuries caused by manual handling you should do all the following EXCEPT:

Question 9 of 50

10. Give TWO answers as to how excess noise can affect your health. (Choose 2 answers)

Question 10 of 50

11. When does your employer need to provide a first-aid box?

Question 11 of 50

12. You believe that excess noise at the job site has damaged your hearing. What do you need to do?

Question 12 of 50

13. What should you do if you notice a safety hazard that no one else seems to notice?

Question 13 of 50

14. Who is responsible for recording an injury in the accident book?

Question 14 of 50

15. What should you do if you’re unsure about a particular topic discussed during a site induction?

Question 15 of 50

16. Before starting your shift you’re given a dust mask that’s too big and keeps falling off, what should you do?

Question 16 of 50

17. What should you do if the toilet on your worksite doesn’t work and is always in a messy state?

Question 17 of 50

18. You need to sweep up dust that was created during your shift. You should:

Question 18 of 50

19. Why are site inductions important?

Question 19 of 50

20. What TWO methods can you use to reduce the amount of dust from becoming airborne? (Choose 2 answers)

Question 20 of 50

21. You should not store loose batteries in a tool bag because___.

Question 21 of 50

22. What does the health and safety sign below mean?

Health-and-Safety-Sign-9

Question 22 of 50

23. What does the health and safety sign below mean?

safety-sign-10

Question 23 of 50

24. What does the health and safety sign below mean?

Health and Safety Sign

Question 24 of 50

25. What is the safest way of entering and exiting a deep excavation?

Question 25 of 50

26. After raising a fire alarm, what’s the next thing you should do?

Question 26 of 50

27. Which of these statements is true about using ladders?

Question 27 of 50

28. Are you responsible for helping to reduce the amount of waste created on-site?

Question 28 of 50

29. You have to work in an excavation, what is the main hazard while working?

Question 29 of 50

30. Hand-arm vibration syndrome or vibration white finger can be described as:

Question 30 of 50

31. Information regarding your emergency assembly points will be ___.

Question 31 of 50

32. What should you do if one of your colleague has a nail stuck in their foot and you are not a trained first aider?

Question 32 of 50

33. Wet chemical fire extinguishers are identified by which colour?

Question 33 of 50

34. What could happen if oxygen levels in a confined space drops below 8 percent?

Question 34 of 50

35. Details about the site traffic rules are usually discussed:

Question 35 of 50

36. You witness a near miss and the worker involved is afraid of getting into trouble, what should you do?

Question 36 of 50

37. What should you do if you suspect the scaffolding you are working from is unsafe?

Question 37 of 50

38. Why should workers be fully trained and competent before they’re allowed to enter a confined space?

Question 38 of 50

39. Guard rails placed around the top of an excavation are meant to ___.

Question 39 of 50

40. What’s the FIRST thing you should do if someone who is working in a deep man hole collapses?

Question 40 of 50

41. Methane gas is very dangerous in confined spaces because: (Choose 2 answers)

Question 41 of 50

42. What should you do if the ladder you’re about to use is damaged?

Question 42 of 50

43. What should you do FIRST if someone is unconscious but you are not a trained first aider?

Question 43 of 50

44. If you want to be a first aider at work you should___.

Question 44 of 50

45. If you have to use water to control dust while cutting you should____.

Question 45 of 50

46. All unsafe working practices should be reported immediately; whose responsibility is it to report unsafe working practices?

Question 46 of 50

47. What do yellow and black health and safety signs like the one below mean?

Health-and-Safety-Sign-11

Question 47 of 50

48. To operate a plant on site you must: (Choose 2 answers)

Question 48 of 50

49. What should you do if your supervisor asks you to drive a truck but you have never driven one before?

Question 49 of 50

50. What should you do if you’re given a cable avoiding tool to use while working but you don’t know how to use it?

Question 50 of 50


 

Like this?

Click on a star to rate it!

Average rating 4.7 / 5. Vote count: 3185

No votes so far! Be the first to rate this post.

CSCS Mock Test | CSCS Revision | CSCS Test Questions