citb mock test 50 questions

CITB Mock Test 50 Questions

This CITB mock test features 50 questions similar to the ones you’ll face when taking the CITB Health, Safety and Environment Test in 2022.

These 50 questions will touch on all 16 core categories you will need to know to pass the CITB HSE test. Please read each question carefully, some may require multiple answers.

Like the real CSCS test, you will need to score at least 45 out of 50 to pass this CITB mock test. Good luck.

1. Which TWO of the following should you keep in mind if you have to carry a load in cold and damp conditions? (Choose 2 answers)

Question 1 of 50

2. Why is your employer legally obligated to discuss matters of health and safety with you?

Question 2 of 50

3. An excavation should be battered back or stepped if ___.

Question 3 of 50

4. If you have to use a ladder, what angle should you adjust the ladder to?

Question 4 of 50

5. Which of these tasks does NOT cause silica dust to enter into the air?

Question 5 of 50

6. You have to adjust an electric hand-tool, what should you do before attempting to adjust it?

Question 6 of 50

7. What does the health and safety sign below mean?


Question 7 of 50

8. When are you LESS likely to suffer from hand-arm vibration syndrome?

Question 8 of 50

9. What type of fire extinguisher is shown below?


Question 9 of 50

10. Which TWO are likely consequences for employers who fail to take appropriate measures to prevent accidents or ill health at work? (Choose 2 answers)

Question 10 of 50

11. What does it mean if you digging and find a run of coloured marker tape?

Question 11 of 50

12. Which statement below is TRUE when it comes to using gloves while handling chemicals?

Question 12 of 50

13. What type of eye protection is most suitable if there’s a risk of materials flying into your eyes?

Question 13 of 50

14. Which activity could create the biggest risk for lead poisoning in a situation where control measures are not in place?

Question 14 of 50

15. What health condition is most likely if a worker uses a grinder without adequate hearing protection?

Question 15 of 50

16. You’re about to start a new task, how would you know if extra PPE is required?

Question 16 of 50

17. Which TWO of these would NOT require portable appliance testing (PAT)? (Choose 2 answers)

Question 17 of 50

18. You need to work near an overhead power line, when would it be safe to do so?

Question 18 of 50

19. Which of these fire extinguisher is most suitable for electrical fires?

Question 19 of 50

20. Which TWO are important factors to consider when it comes to using lifting aids? (Choose 2 answers)

Question 20 of 50

21. What should you do if you’re about to start a job and realize it cannot be done according to the method statement?

Question 21 of 50

22. Which of the following hazardous materials should be identified when going through a construction health and safety checklist?

Question 22 of 50

23. Which TWO of these are likely potential health issues for someone who uses a hammer drill for long periods of time? (Choose 2 answers)

Question 23 of 50

24. The TWO main reasons why all accidents, incidents and near misses must be reported are ___. (Choose 2 answers)

Question 24 of 50

25. What does the health and safety sign below mean?


Question 25 of 50

26. What does the health and safety sign below mean?

Health and Safety Sign

Question 26 of 50

27. Ladders should never be painted because:

Question 27 of 50

28. What should you do if your doctor says you have hand-arm vibration syndrome and he/she believes it was most likely caused through your work?

Question 28 of 50

29. When planning the safe system of work for manual handling, who should be involved?

Question 29 of 50

30. What type of eye protection should you wear if you have to use a cut-off-saw or grinder?

Question 30 of 50

31. For maximum protection, how should you insert disposable foam ear plugs?

Question 31 of 50

32. Whenever required, your employer must ensure they provide you with instructions that ___.

Question 32 of 50

33. You’re working with a new chemical/substance and you start to feel ill, what should you do?

Question 33 of 50

34. You are given a task that requires using a power tool and need to carry out a visual inspection. Which TWO of these should you ensure when carrying out the visual inspection? (Choose 2 answers)

Question 34 of 50

35. What is the MAIN reason why battery-powered tools are preferred instead of their electrical counterparts?

Question 35 of 50

36. You have to work in an excavation, what is the main hazard while working?

Question 36 of 50

37. Which statement below is TRUE when it comes to lifting a load while sitting down?

Question 37 of 50

38. Which of these is the LEAST important reason why all accidents must be reported?

Question 38 of 50

39. You’re about to start working and realize that a design detail cannot be built according to its plans, what TWO things should you do? (Choose 2 answers)

Question 39 of 50

40. What should you do if you notice a worker driving plant equipment way above the site speed limit?

Question 40 of 50

41. What should you do if you are using a generator to power some lighting and the lamp blows?

Question 41 of 50

42. What should you do if a fire breaks out and you’ve not been trained to use a fire extinguisher?

Question 42 of 50

43. Which TWO are likely consequences for YOU if your employer fails to take appropriate measures to prevent accidents or ill health at work? (Choose 2 answers)

Question 43 of 50

44. Which of these is TRUE if you have to twist or turn your body while lifting and placing a load?

Question 44 of 50

45. If your job requires you to use a hazardous substance, whose responsibility is it to explain the health risks and safe method of work you need to follow?

Question 45 of 50

46. Which THREE of these hazards are likely to affect a worker who is using an air-powered tool? (Choose 3 answers)

Question 46 of 50

47. Checking a ladder before use should be done by?

Question 47 of 50

48. A toolbox talk is ___.

Question 48 of 50

49. The colour coding for a dry powder fire extinguisher is ___.

Question 49 of 50

50. Which of the following is NOT a class A material?

Question 50 of 50


Category: CSCS Mock Test

Comments (7)

  1. Kevin Wood says:

    Good mock test

  2. johnson says:

    top class

  3. andrew ferrell says:

    its a really good test

  4. Richard says:

    Great mock test. Make sure you’ve understood the question.

  5. Jack says:

    Best cscs mock test site on the net. I’ve just passed my rest this morning

  6. Tek says:

    thank you so much

Leave a Reply to Tek Cancel reply

Your email address will not be published. Required fields are marked *