CITB Mock Test 50 Questions

This CITB mock test features 50 questions similar to the ones you’ll face when taking the CITB Health, Safety and Environment Test in 2024.

These 50 questions will touch on all 16 core categories you will need to know to pass the CITB HSE test. Please read each question carefully, some may require multiple answers.

Like the real CSCS test, you will need to score at least 45 out of 50 to pass this CITB mock test. Good luck.

1. What type of fire extinguisher is shown below?

Fire-Extinguisher-4

Question 1 of 50

2. Which TWO are likely consequences for employers who fail to take appropriate measures to prevent accidents or ill health at work? (Choose 2 answers)

Question 2 of 50

3. Which THREE of these hazards are likely to affect a worker who is using an air-powered tool? (Choose 3 answers)

Question 3 of 50

4. Which of the following hazardous materials should be identified when going through a construction health and safety checklist?

Question 4 of 50

5. Which of these fire extinguisher is most suitable for electrical fires?

Question 5 of 50

6. What should you do if a fire breaks out and you’ve not been trained to use a fire extinguisher?

Question 6 of 50

7. Which TWO of these would NOT require portable appliance testing (PAT)? (Choose 2 answers)

Question 7 of 50

8. If you have to use a ladder, what angle should you adjust the ladder to?

Question 8 of 50

9. Which statement below is TRUE when it comes to using gloves while handling chemicals?

Question 9 of 50

10. What does the health and safety sign below mean?

Health-and-Safety-Sign-9

Question 10 of 50

11. What should you do if you’re about to start a job and realize it cannot be done according to the method statement?

Question 11 of 50

12. Which activity could create the biggest risk for lead poisoning in a situation where control measures are not in place?

Question 12 of 50

13. What does the health and safety sign below mean?

Health and Safety Sign

Question 13 of 50

14. You have to work in an excavation, what is the main hazard while working?

Question 14 of 50

15. What does the health and safety sign below mean?

Fire

Question 15 of 50

16. Why is your employer legally obligated to discuss matters of health and safety with you?

Question 16 of 50

17. What should you do if you notice a worker driving plant equipment way above the site speed limit?

Question 17 of 50

18. Which TWO of these are likely potential health issues for someone who uses a hammer drill for long periods of time? (Choose 2 answers)

Question 18 of 50

19. You have to adjust an electric hand-tool, what should you do before attempting to adjust it?

Question 19 of 50

20. The TWO main reasons why all accidents, incidents and near misses must be reported are ___. (Choose 2 answers)

Question 20 of 50

21. You are given a task that requires using a power tool and need to carry out a visual inspection. Which TWO of these should you ensure when carrying out the visual inspection? (Choose 2 answers)

Question 21 of 50

22. Ladders should never be painted because:

Question 22 of 50

23. What does it mean if you digging and find a run of coloured marker tape?

Question 23 of 50

24. Which of the following is NOT a class A material?

Question 24 of 50

25. You need to work near an overhead power line, when would it be safe to do so?

Question 25 of 50

26. Whenever required, your employer must ensure they provide you with instructions that ___.

Question 26 of 50

27. Which TWO are likely consequences for YOU if your employer fails to take appropriate measures to prevent accidents or ill health at work? (Choose 2 answers)

Question 27 of 50

28. Which of these is TRUE if you have to twist or turn your body while lifting and placing a load?

Question 28 of 50

29. You’re about to start working and realize that a design detail cannot be built according to its plans, what TWO things should you do? (Choose 2 answers)

Question 29 of 50

30. What type of eye protection should you wear if you have to use a cut-off-saw or grinder?

Question 30 of 50

31. When planning the safe system of work for manual handling, who should be involved?

Question 31 of 50

32. An excavation should be battered back or stepped if ___.

Question 32 of 50

33. Which statement below is TRUE when it comes to lifting a load while sitting down?

Question 33 of 50

34. The colour coding for a dry powder fire extinguisher is ___.

Question 34 of 50

35. What should you do if you are using a generator to power some lighting and the lamp blows?

Question 35 of 50

36. Checking a ladder before use should be done by?

Question 36 of 50

37. Which TWO are important factors to consider when it comes to using lifting aids? (Choose 2 answers)

Question 37 of 50

38. Which TWO of the following should you keep in mind if you have to carry a load in cold and damp conditions? (Choose 2 answers)

Question 38 of 50

39. You’re working with a new chemical/substance and you start to feel ill, what should you do?

Question 39 of 50

40. What should you do if your doctor says you have hand-arm vibration syndrome and he/she believes it was most likely caused through your work?

Question 40 of 50

41. A toolbox talk is ___.

Question 41 of 50

42. You’re about to start a new task, how would you know if extra PPE is required?

Question 42 of 50

43. What is the MAIN reason why battery-powered tools are preferred instead of their electrical counterparts?

Question 43 of 50

44. When are you LESS likely to suffer from hand-arm vibration syndrome?

Question 44 of 50

45. Which of these is the LEAST important reason why all accidents must be reported?

Question 45 of 50

46. If your job requires you to use a hazardous substance, whose responsibility is it to explain the health risks and safe method of work you need to follow?

Question 46 of 50

47. What health condition is most likely if a worker uses a grinder without adequate hearing protection?

Question 47 of 50

48. Which of these tasks does NOT cause silica dust to enter into the air?

Question 48 of 50

49. For maximum protection, how should you insert disposable foam ear plugs?

Question 49 of 50

50. What type of eye protection is most suitable if there’s a risk of materials flying into your eyes?

Question 50 of 50


 


CITB Mock Test FAQ


1. What’s the pass mark for this CITB CSCS mock test?

To pass this CSCS mock test, you’ll need to get at least 45 out of 50 questions correct. For the questions that require 2 or more answers, you’ll need to select all the correct answers to get that question correct.

For example, if a question requires 2 correct answers and you choose 1 correct and 1 incorrect answer, that question will be marked as incorrect.

2. Is there a time limit?

No, there’s no time limit for any of our CSCS mock tests. This was implemented so that you can take your time and go through every question, twice if necessary.

One of the main reasons why people fail their CSCS test is because they don’t read the questions properly, so, take your time and read each question before submitting your answer.

3. How will I know if I pass this practice test?

Once you’ve submitted your final answer, all of your answers will be marked automatically and you will receive a Pass or Fail result.

In addition, you’ll also get a full breakdown of all the questions with answers to use for future practice.

4. What should I do if I fail this CSCS mock test?

As with everything in life, practice makes perfect. If you don’t pass on your first try, keep practicing and you will improve.

Remember, the CSCS test is not just about getting 50 out of 50, it’s about actually knowing what to do in the situation highlighted in each question.

Like this?

Click on a star to rate it!

Average rating 4.6 / 5. Vote count: 1970

No votes so far! Be the first to rate this post.

CSCS Mock Test | CSCS Revision | CSCS Test Questions