CSCS Work at Height Mock Test (Specialist)

The CSCS work at height mock test below features 32 random CSCS test questions for those preparing to take their specialist work at height test in 2024.

As with the other specialist tests, you’ll have to answer questions from the core knowledge section and questions from the specialist test you’re taking (in this case – work at height).

You can use this free CSCS mock test to practice the core knowledge questions.

Please note that some questions require multiple answers, you’ll need to select all the correct answers for that question to get a full point.

The pass mark for this practice test is 30 out of 32. Good luck!!!

1. When is a person who is not a scaffolder allowed to remove parts from a scaffold?

Question 1 of 32

2. What is the FIRST thing you should consider if you have to work above public areas?

Question 2 of 32

3. You have to work at height, when is it most appropriate to use a safety harness and fall-arrest lanyard?

Question 3 of 32

4. What should you do if you need to cross a roof you think might be fragile?

Question 4 of 32

5. Why is it dangerous to leave someone in a harness for too long after they have fallen?

Question 5 of 32

6. What should you do if you discover a rung missing near the top of the ladder you’re about to use?

Question 6 of 32

7. What THREE things MUST you do if you intend to store materials on a roof? (Choose 3 answers)

Question 7 of 32

8. What does the Beaufort Scale measure?

Question 8 of 32

9. If you have to work from a cherry picker, you should attach your lanyard to ___.

Question 9 of 32

10. Which THREE details must be included in a method statement for working at height? (Choose 3 answers)

Question 10 of 32

11. When would it be acceptable to jump from a mobile elevating work platform (MEWP) to a high-level work platform?

Question 11 of 32

12. What TWO things should you consider doing if you have to access a roof and your only option is to place a ladder against a plastic gutter? (Choose 2 answers)

Question 12 of 32

13. What should your FIRST consideration be if you are working from a cherry picker and the weather becomes very windy?

Question 13 of 32

14. Safety nets should be installed by ___.

Question 14 of 32

15. You’re trying to clip your lanyard to an anchor point and realize the locking device does not work, what should you do?

Question 15 of 32

16. What is the purpose of edge protection?

Question 16 of 32

17. Where is the ideal place to rig a safety net?

Question 17 of 32

18. You’re about to start work at height and receive a report that the wind will increase to Force 7, what should you expect?

Question 18 of 32

19. Who should erect and dismantle a scaffold tower?

Question 19 of 32

20. What should you do if you need to use a safety lanyard but the stitching is damaged?

Question 20 of 32

21. What is the maximum vertical distance allowed between landings when using portable or pole ladder for access?

Question 21 of 32

22. When would it be acceptable for someone to use ground-level controls while you are working at height on a mobile elevating work platform (MEWP)?

Question 22 of 32

23. What should you do if a scaffold tie constantly gets in your way while working?

Question 23 of 32

24. What should you do if you discover the safety net you are working above is damaged?

Question 24 of 32

25. How should you wear your safety helmet when leaning over an exposed edge while working at height?

Question 25 of 32

26. What is the maximum permitted gap between the guard rails on a working platform?

Question 26 of 32

27. What is the MAIN reason for using a safety net or soft-landing system instead of a personal fall-arrest system?

Question 27 of 32

28. You need to use inflatable airbags to protect a small area, why is it dangerous to use airbags that are larger than the area that needs to be protected?

Question 28 of 32

29. What should you do if you have to carry out work at height and the securing cord for a safety net is in your way?

Question 29 of 32

30. What should you do if the cherry picker you’re working from does not reach the area you need to work?

Question 30 of 32

31. When is it necessary to fit guard-rails to a working platform?

Question 31 of 32

32. The MAIN reason why debris should not be allowed to gather in a safety net is ___.

Question 32 of 32


 

Like this?

Click on a star to rate it!

Average rating 4.8 / 5. Vote count: 2069

No votes so far! Be the first to rate this post.

CSCS Mock Test | CSCS Revision | CSCS Test Questions